Transform Your Ubuntu System into a Windows 10 Bootable USB with Easy-to-Follow Code Guides

Table of content

  1. Introduction
  2. Requirements
  3. Downloading Ubuntu ISO
  4. Creating Bootable USB Drive
  5. Converting Ubuntu to Windows 10
  6. Testing the Bootable USB Drive
  7. Troubleshooting Common Issues
  8. Conclusion


When it comes to installing a new operating system on your computer, the process can be daunting. However, creating a bootable USB drive can make the process much easier. In this guide, we will discuss how to transform your Ubuntu system into a Windows 10 bootable USB with easy-to-follow code guides.

By creating a bootable USB drive with Windows 10, you can easily install the operating system on your computer without having to use a DVD. Additionally, having a bootable USB drive can be useful for repairing or reinstalling Windows 10 on your computer in case of a system crash or hard drive failure.

Throughout this guide, we will provide step-by-step instructions and code examples to help you create your own bootable USB drive with Windows 10. Whether you’re a beginner or an experienced Ubuntu user, this guide will provide you with everything you need to know to get started. Keep reading to learn more!


Before you begin transforming your Ubuntu system into a Windows 10 bootable USB, you need to make sure you have the following:

Ubuntu System

You will need a Ubuntu system with administrative privileges to execute the code commands necessary for creating a bootable USB. If you don't have Ubuntu installed on your computer, you can download and install it from the official website.

Windows 10 ISO File

You will need a Windows 10 ISO file, which is a disk image of the Windows 10 operating system. You can download it from the official Microsoft website. Make sure to choose the appropriate language, edition, and architecture that match your system configuration.

USB Drive

You will also need a USB drive that is at least 8GB in size. This USB drive will be used to create the bootable Windows 10 installation media.

Command Line Terminal

The code commands required to create the bootable USB must be executed through a command line terminal. Ubuntu comes with a built-in terminal, so you don't need to install any additional software. Just access the terminal through the Ubuntu interface.

Once you have all the in place, you can get started with the code guides to transform your Ubuntu system into a Windows 10 bootable USB.

Downloading Ubuntu ISO

Before you can create a Windows 10 bootable USB from your Ubuntu system, you will need to download the Ubuntu ISO file. The ISO file contains the Ubuntu operating system, which you will use to create the bootable USB. Here's how to download the Ubuntu ISO:

  1. Go to the Ubuntu website at

  2. Click the Download button.

  3. Select the version of Ubuntu you want to download from the drop-down menu. You can choose between the latest LTS (Long-Term Support) version or the latest non-LTS version.

  4. Choose the architecture of your system. For most users, this will be the 64-bit version.

  5. Click the Download button to start the download.

  6. Once the download is complete, you will have an ISO file that you can use to create your bootable USB.

It's important to note that the Ubuntu ISO file is quite large, so the download may take some time. Additionally, you should ensure that you have a stable internet connection before starting the download. Once the download is complete, you can proceed with creating your Windows 10 bootable USB using the steps outlined in the guide.

Creating Bootable USB Drive

A bootable USB drive is an important tool for installing or repairing an operating system, such as Windows 10, on a computer. Here are the steps to create a bootable USB drive:

  1. Download the Windows 10 ISO file from the Microsoft website.

  2. Insert a USB drive with at least 8GB of storage space into your computer.

  3. Download and install the WoeUSB application from the Ubuntu Software Center.

  4. Launch WoeUSB and select "From a disk image (iso)" option.

  5. Choose the ISO file of Windows 10 and select the target device, which is your USB drive.

  6. Select the file system and partition scheme options. If the target system uses UEFI mode, choose GPT partition scheme and NTFS file system. If the target system uses BIOS mode, choose MBR partition scheme and FAT32 file system.

  7. Click the “Install” button and wait for the process to finish.

Congratulations! You have now created a bootable USB drive for Windows 10 using Ubuntu. This USB drive can be used to install or repair Windows 10 on a computer. Remember to change the boot order in the BIOS settings of the target system to boot from the USB drive.

Converting Ubuntu to Windows 10

If you're looking to create a Windows 10 bootable USB from an Ubuntu system, there are a few steps you'll need to follow. First, you'll need to download the Windows 10 ISO file and save it to your Ubuntu system. This can be done through the Microsoft website or through other software platforms.

Once you have the ISO file, you'll need to download a utility like WoeUSB, which is designed to help you create bootable Windows USB drives from Ubuntu. This program is available through the Ubuntu Software Center or can be downloaded through the command line.

Next, you'll need to open up WoeUSB and select the ISO file you just downloaded. You'll also need to select the USB drive you want to use for the installation. Be sure to double-check that you have selected the correct drive, as this process will erase all existing data on the drive.

Finally, you'll need to click the "Install" button and wait for the process to complete. The time it takes will depend on the size of the ISO file and the speed of your USB drive.

Overall, this process can help you easily convert your Ubuntu system into a Windows 10 bootable USB, allowing you to install the operating system on any compatible computer. Just be sure to follow all steps carefully and double-check all selections before proceeding to avoid any potential data loss or errors.

Testing the Bootable USB Drive

Once you have created a Windows 10 bootable USB drive, it is important to test it to ensure that it is fully functional and can be used to boot your system. Here are some steps that you can follow to test your bootable USB drive:

  1. Insert the USB drive into your computer's USB port.
  2. Restart your computer and access the boot menu by pressing the appropriate key (usually F12 or Esc).
  3. Select your USB drive from the list of bootable devices.
  4. Wait for Windows 10 to load from the USB drive.

If everything works correctly, you should be able to boot into Windows 10 from the USB drive. However, if you encounter any issues, it may be due to a problem with the USB drive or the steps taken during the creation process.

Here are some troubleshooting steps that you can follow if you encounter issues:

  • Check that the USB drive is connected properly and is recognized by your computer.
  • Check that the BIOS settings on your computer are configured to allow booting from USB devices.
  • Reformat the USB drive and repeat the creation process, ensuring that you follow all of the necessary steps correctly.

Overall, testing your bootable USB drive is an important step in ensuring that it is functional and can be used to boot your system. By following the steps outlined above and troubleshooting any issues that arise, you can be confident that your Windows 10 bootable USB drive is ready to use.

Troubleshooting Common Issues

If you encounter any errors or issues while transforming your Ubuntu system into a Windows 10 bootable USB using the code guides, don't worry. Here are some common problems and their solutions:

"Permission Denied" Error

If you see a "permission denied" error when trying to run the code, it means that you don't have sufficient privileges. You can try running the code again as the root user. To do this, open a terminal window and type the following command:

sudo su

Then, enter your password and press Enter.

USB Drive Not Recognized

If your Ubuntu system is not recognizing your USB drive, try the following steps:

  1. Check the USB port – make sure that the USB port you are using is working. Try plugging in a different device to check if the port is functional.

  2. Check the USB drive – plug in the USB drive to a different computer to see if it works. If it does, there may be an issue with your Ubuntu system.

  3. Format the USB drive – if the USB drive is not formatted correctly, it may not be recognized by your Ubuntu system. Try formatting the drive using the Disk Utility tool.

Code Not Working

If the code is not working as expected, make sure that you have followed the guide correctly. Some common mistakes that you may have made include:

  • Entering the wrong device name for your USB drive
  • Using incorrect file paths
  • Forgetting to add or remove spaces in the code

Double-check your code and make sure that the commands are entered correctly.


By following these troubleshooting tips, you should be able to solve any issues that you encounter while transforming your Ubuntu system into a Windows 10 bootable USB. Remember to be patient and take your time to ensure that everything is entered and configured correctly. With a little persistence, you'll have a bootable Windows 10 USB in no time!


In , transforming your Ubuntu system into a Windows 10 bootable USB with the help of easy-to-follow code guides can be a great way to experience the benefits of both operating systems. With the ability to switch between Ubuntu and Windows 10 at will, you can enjoy the stability and customization options of Ubuntu while also accessing the vast array of applications and software available on Windows 10.

By following the steps outlined in this guide and using the recommended tools, you can create a bootable USB that is fully compatible with both UEFI and Legacy BIOS systems. Whether you're starting a new project or just looking to try something new, this process can be a great way to expand your knowledge of operating systems and enhance your computing experience.

Remember, creating a bootable USB is a technical process, so make sure to read through the guides carefully and follow the steps in order. If you encounter any issues, don't panic – there are many resources available online to help troubleshoot problems and find solutions.

We hope that this guide has been informative and helpful in your quest to transform your Ubuntu system into a Windows 10 bootable USB. Good luck, and happy computing!

Cloud Computing and DevOps Engineering have always been my driving passions, energizing me with enthusiasm and a desire to stay at the forefront of technological innovation. I take great pleasure in innovating and devising workarounds for complex problems. Drawing on over 8 years of professional experience in the IT industry, with a focus on Cloud Computing and DevOps Engineering, I have a track record of success in designing and implementing complex infrastructure projects from diverse perspectives, and devising strategies that have significantly increased revenue. I am currently seeking a challenging position where I can leverage my competencies in a professional manner that maximizes productivity and exceeds expectations.
Posts created 3193

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Posts

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top